£1,078.62 £1,294.34 inc VAT
In stock and ready for dispatch
Fläkt Woods Case Mounted Axial Fan 400mm MaXFan Compac C/w Single Phase Inverter 3 Phase Motor - EJ413456
The Woods MaXfan Compac is designed for kitchen canopy systems, offering high performance and pressure with full inverter control.
• High performance & pressure – Single motor & impeller
• Full 1Ph inverter control – Programmed with simply installation
• Compact robust design - DW172 compliant
Product Facts:
• Volumes up to 4.9m3/s
• Static Pressures up to 900 Pa (Non-stalling characteristic)
• Fans tested to ISO5801 and BS848
• High efficiency energy saving IE2 motor
• Low breakout noise levels
• Motor protection and terminal block IP55 (DW172 & Defra Compliant)
• Ambient temperatures up to 80°C (dependent on size)
• Overheat protection as standard
• Compact robust light weight construction
• Galvanised casing for high corrosion resistance
• Full inverter control and flexibility
Electrical Supply:
• 230v/50Hz/1 Ph (3 Ph Motor) - L Type
Temperature Range:
• Suitable for temperatures up to 80°C dependent on the fan size, please refer to the specific fan technical page.
Impellers:
• A unique high efficiency aerofoil section blade with a smoothed hub and clamp plate offers a high efficiency solution. Woods impellers are all high pressure die cast to offer thin aerofoil sections for low generation of noise. Every cast aluminium component is X-ray examined using Real Time Radiography inspection prior to assembly. The maximum pitch angles shown allow for speed control by frequency inverter.
Motors:
• All motors are totally enclosed air stream rated with class F insulation. Constructed from aluminium or cast iron as standard with special pad mounted fixings. Although this product incorporates a three phase electric motor, by using a matched inverter solution it is suitable for use with a single phase electrical supply on site. In addition, using a frequency inverter allows the speed to be turned down to 20% of maximum speed. Suitable for horizontal or vertical shaft operation. Supplied IP55, with removable drain plugs. Sealed for life bearings lubricated with wide temperature range grease. The complete range of motors are fitted with Thermistor OHP as standard. Motors are IE2 efficiency class as standard.
Casing:
• The MaXfan Compac is available with a galvanised casing, complete with an externally mounted pre-wired electrical terminal box. Casings are spun from sheet steel with integral pre-drilled and radiused inlet flanges. The galvanised finish gives a high resistance to corrosion and is ideal for external as well as internal use.
Please call if you require any assistance or help choosing the correct products. Our aim is to ensure that your purchase goes smoothly and is delivered on time.
Please note: we may send out like for like products from different manufacturers.
You can call us on 01455 616 444 or email [email protected]
Visit our trade counter: Unit 3 Claymill Road, Leicester, LE4 9JJ. We are open from 8am to 5pm, Monday to Friday.
Customers rate our excellent service at 4.8 out of 5, based on 782 reviews.
