£9,051.90 £10,862.28 inc VAT
In stock and ready for dispatch
W20 NON ATEX Wet Collector Filter Unit
7.5kw Main Fan Volume 6000 M3h
7.5 Kw Starter panel
Inlet on rear 250mm I/S diameter
DES Wet collector range of dust collection units have been designed to work on extracting dust from processes that may have either sparks or molten particles within the airstream.
Operating principles
As the dust and conveying airstream enters the wet collector, it is forced down through a baffle arrangement which is submerged in a bath of water, as the air is drawn through the water by the top mounted integral fan set. A self-induced scrubbing action is generated which separates the dust particles from the airstream. These particles then sink to the base of the collector where they can be manually raked out when the unit is turned off.
The primary separation is further supplemented by a mist eliminator which is mounted prior to the fan set to give secondary cleaning of the air stream, though under normal circumstances the filtered air should still be discharged to atmosphere. (please note not all dusts are suitable for use with this type of filter unit and we suggest you contact our sales Department to discuss your requirements)
Construction
DES Wet collector type filter units are manufactured from a mild steel sheet of an all welded construction. Fully sealed after construction and then powder coated to a RAL colour of the clients choice before being coated with additional coats of waterproof sealant.
Additional features
Air silencers: to ensure that noise levels are kept to an absolute minimum, we recommend that the units are supplied with factory fitted silencers as standard.
Run on timer: To ensure the dusts have totally evacuated the ductwork. A run on timer can be fitted into the standard control panel which allows the fan set to run on for a set time after the fan stop button has been pressed.
Mechanical water level control: This feature allows the water level to be topped up automatically by use of a mechanical float valve.
Thermostatically Controlled immersion heater: Where the unit is being situated externally the fitting of a controlled immersion heater is recommended to prevent water within the unit from freezing during cold weather.
Please allow approximately 3 to 4 weeks for delivery
Please call for delivery costs or more information 01455 616 444
Please ensure that this is the correct product prior to purchasing as all Dust Extraction Filter Units are made bespoke to order and cannot be returned.
Please call if you require any assistance or help choosing the correct products. Our aim is to ensure that your purchase goes smoothly and is delivered on time.
Please note: we may send out like for like products from different manufacturers.
You can call us on 01455 616 444 or email [email protected]
Visit our trade counter: Unit 3 Claymill Road, Leicester, LE4 9JJ. We are open from 8am to 5pm, Monday to Friday.
Customers rate our excellent service at 4.8 out of 5, based on 747 reviews.
